We are Sturm, Ruger & Company® Certified to work on your Ruger Mini 14® & 30® Rifles. You will no longer need to send your rifle to Ruger for restricted factory work. We can handle any factory replacement part work you are needing from firing pins to trigger components and more..... *All factory warranty issues will still need to be handled through Ruger® for now. Please keep in mind that we have been at the cutting edge of technology when it comes to the Mini 14® and Mini 30® rifles for many years.
|
|
1661 Behrens RDByers, Colorado 80103 Tel: (303) 822-6849 Fax: (720) 367-5095 E-Mail Us at accuracyinc1@aol.com |
| Accuracy Systems' location is not a retail/store front. It is a machine shop with dangerous machines running. For your safety we do not accept walk-ins. PLEASE CALL FOR AN APPOINTMENT IF YOU ARE GOING TO VISIT. THANKS. |
|
PRICES SUBJECT TO CHANGE WITHOUT NOTICE! |
Accuracy Systems Gunsmith Services and Custom Finishes
| Gunsmith Services Below | Part | Labor |
| Trigger Job - 3½ lb. match performance. | ||
| - With take up adjustment screw, Very short take up, No creep, & Very crisp pull. | $79.99 | |
| - Install over travel adjustment screw. | $14.99 | |
| - Trigger Enhancement when installed with the trigger job. | $28.99 | |
| Re install the factory front sight. | ||
| - Without removing barrel from action. | $50.00 | |
| - With having to remove barrel from action. | $100.00 | |
| Barrel fluting adds looks, cooling and lightning | ||
| - Without removing barrel from action. | $179.00 | |
| - With having to remove barrel from action. | $279.00 | |
| Barrel threading for brakes, flash hiders, comps & etc. | ||
| - Without removing barrel from action. | $100.00 | |
| - With us having to remove barrel from action. | $200.00 | |
| Re chamber using existing extractor and bolt face | ||
| - Without removing barrel from action. | $275.00 | |
| - With us having to remove barrel from action. | $325.00 | |
| Re crown barrel | ||
| - Without removing barrel from action if possible. | $50.00 | |
| - With having to remove barrel from action. | $175.00 | |
| Shortening barrel | ||
| - Without removing barrel from action. | $175.00 | |
| - With having to remove barrel from action. | $279.99 | |
| Barrel turning OD change | ||
| - Without removing barrel from action. | $175.00 | |
| - With having to remove barrel from action. | $275.00 | |
| Correct head space | ||
| - Without removing barrel from action. | NA | |
| - With having to remove barrel from action. | $175.00 to $275.00 | |
| Re throat & barrel setback for accuracy | ||
| - Without removing barrel from action. | NA | |
| - With having to remove barrel from action. | $275.00 | |
| Range test. | ||
| - Includes test target with up to one box of ammo. | $132.00 | |
| Bed Action / Three point steel pin bedding | ||
| - Includes Disassembling & reassembling of the rifle | $279.99 | |
| - | ||
| Hourly Shop Rate | ||
| One Hour Minimum | $100.00 | |
| For Services Other Than Shown here Please call or email for pricing. | E-Mail Us | 303-822-6849 |
| Custom Finishes | Complete Rifle |
| - Electroless nickel, satin finish | $279.99 |
| - Hard chrome, satin finish (Steel Parts Only) | $279.99 |
| - Parkerized finish (steel parts only) | $279.99 |
| - Black Oxide (steel parts only) | $279.99 |
| - Anodized (red, dark blue, green, black) Aluminum parts only | $279.99 |
The examples below show some of our barrel work.
Above: 16" Fluted Ultra Match Barrel w/ .875" Varmint size Gas Block
Above: 20" Fluted Ultra Match Varmint Barrel
Above: 20" Fluted Ultra Match Medium Barrel - 50/50 .875" Down to .750"
Above: Shown with .850" barrel, Ben Cooley brake: Price of brake $219.99 * Installed., Barrel fluting Add $179.99.
Barrel fluting $179.99 & Quiet Brake $179.99 Installed Price Shown together on this 1" diameter barrel.
Price for bedding $279.99
Bedding Comparison
Illustration of 3 Point Steel bedding of Action to stock
- A - Inferior Epoxy Bedding - Sloppy and prone to cracking, will breakdown over time and still relies on only trigger guard to hold action in the stock.
- B - Our Three Point Steel Pillar Bedding
- B - Clean looking!
- B - We use three stainless steel pillars epoxied into the stock. *Illustration above & Below.
- B - Then we use three steel screws to bolt the receiver to the stock.
- B - Now you can take your receiver out as many times as you like not effecting the bedding and it always remains strong.
- Below - Red arrows 1, 2, and 3 show how the receiver is meticulously machined.
Price for bedding $279.99
Barrel and Muzzle Crown Comparison
- Competitors "claimed heavy barrel". They give you a discount and take a short cut to do it. Notice that where the gas block goes the barrel is very thin. This is a harmonic weak spot prone to barrel vibration! We do not do this.
- Close up of the competitor's thin spot. This other company saves you $85.00 by using your gas block, but it will cost you in accuracy.
- Competitor's target crown. Notice that the crown is not sharp and crisp. The barrel also looks like the end of a baseball bat.
- Our 11° Recessed target crown is sharp and crisp. This is a must for accuracy! The muzzle also looks more like a gun barrel.
Our .750" Diameter Medium Barrel
- Our chamber is 1" thick for 4". The competitors is .900" for 2". Which chamber do you think is more rigid?
- This is the thinnest point of our barrel and it is still .750". No thin spot in this barrel!!
- Very small shoulder to give the gas block support.
Standard Match with .900" diameter, 20" Matte Black Barrel, Front Tactical Sight, Satin Stainless .900" Gas Block with Stud
Inferior Barrel
There are other companies out there that actually call this their heavy barrel. Stay clear you are just asking to be let down. This is one that has been sent to us to replace with our true heavy barrel. This customer's out his $350.00. You will pay more with us but you will be satisfied with what you get back. You pay for what you get.